I'm with Dean. My van is the only gasoline powered vehicle I own, so I only need the one NOID light for troubleshooting and I, too, am reluctant to buy a whole set. Does anyone know of a source to buy just the one NOID light for the WBX?
Also, some of the kits contain something called an IAC tester. Do we need this?
Mike M

Sent from my iPad

> On Nov 30, 2014, at 09:35, OlRivrRat <OlRivrRat@COMCAST.NET> wrote:
> 
>        The Prob' for Me is that I have an ExtremelyDifficult time trying to Justify
> 
> buying a Whole Set of Somethings that I only need 1 of ~ That takes away the
> 
> "Simple" for Me ~ I have a HugeAversion to being Wasteful ~ It's an Affliction ~
> 
> I know that the Sets are QuiteEasilyAvailable & Cheap ~ BUT ~ DangIt ~
> 
>                                                        ORR ~ DeanB
> 
> 
>> On 30 Nov , 2014, at 1:31 AM, SDF ( aka ;jim lahey' - Scott ) wrote:
>> 
>> you go to a parts store and buy one.
>> 
>> if they don't know what one is ..
>> they don't know their parts business.
>> it's a standard diagnostic tool..
>> 
>> google it.
>> 
>> 
>>> On 11/29/2014 5:15 PM, Michael Magnani wrote:
>>> NOID light? How do I make one of these?
>>> Mike M
>>> 
>>> 
>>> On Saturday, November 29, 2014 4:17 PM, "SDF ( aka ;jim lahey' - Scott
>>> )" <scottdaniel@TURBOVANS.COM> wrote:
>>> 
>>> 
>>> can't say it enough..
>>> it is just SO HANDY to have a simple, small, and not expensive
>>> ...............NOID light.
>>> 
>>> that way ..in 10 seconds you can find out if the ECU is triggering the
>>> injectors ..
>>> which goes a long way toward identifying what is going on. ..whether you
>>> get flashes while cranking or not.
>>> 
>>> or in a rare case dim or intermittant flashes ( saw that on a Subaru
>>> conversion I bought once....in the end it was a matter of battery cable
>>> sizes. quite odd, but that was it. )
>>> 
>>> 
>>> 
>>> 
>>>> On 11/29/2014 1:39 PM, Steve Williams wrote:
>>>>> On 11/29/2014 3:15 PM, Raymond Markett wrote:
>>>>> Did you check inside the distributor cap for condensation?
>>>> 
>>>> Thanks for the suggestion.
>>>> 
>>>> I just did that.  No obvious condensation.  I wiped the inside of the
>>>> distributor cap with a dry cloth.  No change.
>>> 
>>>