Another major difference in the Subie fasteners is the plating. You can usually use a wrench instead of a torch and drill.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Larry Alofs
Sent: Wednesday, December 24, 2014 9:43 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: adjusting rear brakes! removing rear drums Bolt sizes!

You said:
"That would change to "JIS8" ("ISO8"?)
for Toyotas where the 8 mm bolt takes a 12 mm wrench."

For vanagons, this also applies to those of us using Subie engines.  After a number of years it still seems strange to never find a 13 mm hex on the engine.

Larry A.

>