Are you trying to cut through the bolt where the trailing arm attaches to the body?

Jim 

> On Jan 20, 2015, at 12:26 PM, Neil N <musomuso@GMAIL.COM> wrote:
> 
> FWIW, my angle grinder + 4.5" cut off wheel didn't seem to fit the
> work area at inboard mounting bolt so I used a hacksaw. Surprisingly,
> it cut through one end of bolt fairly easily.
> 
> I don't know if a larger cut off wheel will fit my angle grinder but
> would appreciate
> methods and-or tool suggestions for cutting the inboard mounting bolt.
> 
> Neil.
> 
> 
>> On 1/17/15, Neil N <musomuso@gmail.com> wrote:
>> 
>> Ya. It's rusty.
> 
> --
> Neil n
> 
> Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>
> 
> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>
> 
> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>
> 
> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>