So for the soldering, I should just think of it like tack welding I guess?
Would you still try and let the copper melt the solder? Seems like that
might take longer than 4 seconds.

 The PCB sounds good, but at that price I think I would probably replace
the whole thing with the Gowesty kit. It's bound to happen again right?

On Sat, Jan 17, 2015 at 7:56 PM, Jon VO <jondvo@gmail.com> wrote:

> You could try the PCB trace repair kit, not sure how well it will adhere.
> Use some denatured alcohol on a swab to clean and try the repair. I've used
> this stuff on FR4 PCB's and it works fine.
> http://www.soldertools.net/products/PCB-Trace-Repair-Kit.html
> Jon
>
>
>
> On 1/17/2015 3:58 PM, Michael McSwain wrote:
>
>> Hoping to repair rather than replace or completely rewire my instrument
>> cluster wiring.
>> I went to change out the little lights in the instrument cluster
>> (speedo/warning lights clock/etc.) for LEDs and ended up tearing the part
>> of the ribbon for the speedo light.
>>
>> If your not familiar with the way the lights plug in, they fit inside a
>> circular cut out of the ribbon that has some copper foil/ribbon exposed.
>> Push/Twist/Lock.
>>
>> Well, either when I took the old light off or put the new light on I tore
>> that little copper piece. Now when I press down and twist the new light
>> into place it just pushes the torn piece of copper out of the way instead
>> of making contact. No lights... Part of the copper foil is still there
>> though and I'm debating finding some new foil that I might be able to cut
>> into a circle and just glue it down over the circle that I tore so that
>> it's at least pressing up against the remaining copper and also making
>> good
>> contact with my bulb.  Probably not the most permanent fix, but I'm hoping
>> it might work until next bulb replacement or corrosion starts in.
>>
>> I see Gowesty has a total replacement kit $$$$, and I've seen posts where
>> people have rewired the whole thing diy.  Neither of those options sound
>> super appealing to me.
>>
>> Any better ideas?
>>
>
>

--
yea yea yea..