I myself would not add a toggle to just the detector... That might be
something that can be toggled off and forgotten about even while the van is
in use. Too easy to turn off.

If you're looking to turn off all aux battery power while van is in storage
etc you can always add a Blue Sea Battery Switch. Simply an On/Off for the
entire aux battery system. Not just the detector.

http://www.amazon.com/gp/product/B00445KFZ2/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00445KFZ2&linkCode=as2&tag=txv-20&linkId=ID6R7XPQBKYLHFUQ

Just a thought

I have 2 of the switches under my drivers seat. One for the Main Battery
and one for the Aux Battery System. Good o note that my swivel base has
been removed under this seat.

http://dasmotoclub.com/wp-content/uploads/2015/01/auxbattery4.jpg

Abel Longoria
www.DasMotoClub.com

On Tue, Jan 27, 2015 at 2:17 PM, Dennis Jowell <dennisjowell@gmail.com>
wrote:

> Good morning listers ,
> I wanted to install a co and smoke detector in my 1988 Westy. The detector
> is from Amazon :
> http://www.amazon.com/exec/obidos/ASIN/B005GSFUWE/sbw/
>
> Hard wire it off the aux: battery but am a little confused on the wiring
> set up.
> I wanted to add a toggle switch to shut power off to the detector when the
> Westy is down for some time. Didn't want to run the battery down.
> My thought process is :
> From battery, Red wire to +, then to fuse, then to toggle switch, then to
> detector.
> Black - to ground. Will the toggle work and save the battery in this
> configuration?
> Thanks for any suggestions
>
> Dennis Jowell
> Scotch Hollow Farm
> Newbury, Vermont
>