John, I have used ones in stock.  I usually sell them for $40 each plus
shipping them to you via priority mail shipping which is an additional $7
for as many as you may need.  There some aftermarket ones listed out there
but all of them I have purchased have been a different length than the
stock waterboxer push rods.  Just found out that they are the correct
length for some of the aircooled Vanagon 2.0l engine, even though I thought
those were the same as the bus AC push rods (live and learn).

Let me know if I can help you further.
Ken

On Sat, Feb 7, 2015 at 3:23 PM, John Rodgers <jrodgers113@gmail.com> wrote:

> Finally got around to fixing my pushrod tube leak. Found there was a 4 inch
> crack in one tube. Upon disassembly and removal of the push rods, I found
> two of them bent. Probably accounts for the one cracked tube at least. On
> the passenger side, as seen from the rear of the van, from back to front,
> it was the 2nd and 4th push rod.
>
> The engine has run fine, but for the oil leak. But this has to be fixed.
> Anyone have  two or four pushrods from a junked 2.1 L that they care to
> part with? Would be much appreciated. My van is down for the count as it
> sits.
>
> Thanks,
>
> John
>

--
Thanks,
Ken Wilford
John 3:16
www.vanagain.com