Only $27 brand new from Van Café:

http://www.van-cafe.com/home/van/page_1685_716/new-push-rod.html

Cheers, 

Jeff

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of kenneth wilford (Van-Again)
Sent: Monday, February 09, 2015 6:09 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: 2.1 L push rods

John, I have used ones in stock.  I usually sell them for $40 each plus shipping them to you via priority mail shipping which is an additional $7 for as many as you may need.  There some aftermarket ones listed out there but all of them I have purchased have been a different length than the stock waterboxer push rods.  Just found out that they are the correct length for some of the aircooled Vanagon 2.0l engine, even though I thought those were the same as the bus AC push rods (live and learn).

Let me know if I can help you further.
Ken

On Sat, Feb 7, 2015 at 3:23 PM, John Rodgers <jrodgers113@gmail.com> wrote:

> Finally got around to fixing my pushrod tube leak. Found there was a 4 
> inch crack in one tube. Upon disassembly and removal of the push rods, 
> I found two of them bent. Probably accounts for the one cracked tube 
> at least. On the passenger side, as seen from the rear of the van, 
> from back to front, it was the 2nd and 4th push rod.
>
> The engine has run fine, but for the oil leak. But this has to be fixed.
> Anyone have  two or four pushrods from a junked 2.1 L that they care 
> to part with? Would be much appreciated. My van is down for the count 
> as it sits.
>
> Thanks,
>
> John
>

--
Thanks,
Ken Wilford
John 3:16
www.vanagain.com