Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: PREPING FOR PAINT JOB ON 87 WESTY
From:Stacy Schneider
Date:Fri, 6 Mar 2015 20:03:01 -0800

Don't forget a new front glass while you're at it. No sense in doing all that work and putting in an old glass. You wouldn't Drive with bald tires , a worn glass is the equivalent if an old thread bare tire. 
          A lot of tint shops can do basic rubber set glass installs which a Vanagon is . 

                              Stacy

                         
               

Sent from my iPhone

> On Mar 6, 2015, at 12:26 PM, Edward V Barger <edvbarger@MAC.COM> wrote:
> 
> HI 
> 
> preparing to paint our 87 west pop  top   
> 
> will be pulling the windows and replacing the seals   
> 
> also removing the top  to paint  
> 
> Keeping it the same dark grey bottom  with the light grey pop top 
> 
> will paint the bottom bit of the body with the bed liner paint  to reduce the rock chips from gravel / dirt roads
> 
> Also plan to ad another of the utility boxes just behind the drivers side door  this is to accommodate a 12 volt plug to plug in the solar panel  the  controls fuse box and inverter are mounted behind the drivers seat on the side of the cabinet  and the batteries are under the drivers seat  so think this is a good place  to put the utility box 
> 
> any and all  feed back  comments  etc  etc   welcomed   want to do it correctly 
> 
> 
> Thinking will need 
> 
> Seals for pop top and luggage rack
> 
> 
> 
> Seals for the  windows : windshield ,  rear hatch  and the 4 side windows
> 
> 
> 
> Wipers for the two  front doors 
> 
> 
> 
> Seals for the  refrigerator vent
> 
> 
> 
> Seals for the 3 boxes on the drivers side for the utilities
> 
> 
> 
> The door seals  seem to be OK  so do not plan to replace them  
> 
> 
> 
> I already have the additional utility box  but not installed yet  will do that at the body shop I have a shop picked and have a price on the total paint and body work 
> 
> But will need to find an experienced person to remove and instal the windows   thinking of having them tinted at the same time ???
> what else am I missing  and where to I get the best quality and price  on all 
> 
> 
> thanks 
> 
> ed
> 
> 
> 
> Edward V Barger
> edvbarger@mac.com <mailto:edvbarger@mac.com>
> BARGER LITE 
> ed@barger-lite.com
> BARGER-LITE.COM    
> 310 401 0633