Which seal are you replacing?  The one that goes all the way around the door in one strip?  The one that is on just the front of the door?  Or the seals on the windows?  Use this Bus Depot diagram to sort them out:  http://www.busdepot.com/details/vanagonrubber/

I've done the front door window weather channels and weather strip - quite easy, but measure carefully, and start with the end that tucks in under the vent window's rubber.  The weatherstripping that goes all around the door is not much more difficult, except that it stretches in places if you're not careful;  measure and be sure you're getting it mounted evenly.

James
Ottawa, ON
'91 Westy Weekender

> Date: Sat, 7 Mar 2015 19:19:15 -0800
> From: a.robinson.lists@GMAIL.COM
> Subject: Door seal replacement
> To: vanagon@GERRY.VANAGON.COM
> 
> I'm about to replace the top driver door seal that ripped and now let's a lot of wind noise in at the top of the window.
> 
> I've never done this before. Any tips or tricks that might help me along? My assumption is peel it away, clean off any residue, and reverse the removal.
> 
> Thanks!
> Aaron
> '91 tin top.