The bulbs "should" only go in one way because of the staggered pins on
the bulb base. Do the running lights work and turn signal lights work
properly if the headlights are off?
Jon

On 3/26/2015 11:56 AM, T Collins wrote:
> check grounds at the bulb and make sure ALL bulbs are seated...
> next I would check other new bulbs
>
> On Thu, Mar 26, 2015 at 1:40 PM, Dean S <predsmaniac@gmail.com> wrote:
>
>> No water nice and dry
>>
>> I just tried to turn them 180*  no effect
>>
>>
>>
>> On Thu, Mar 26, 2015 at 1:23 PM, T Collins <tonycollin@gmail.com> wrote:
>>
>>> 2 questions:
>>> 1) is there water in the lenses/enclosure?
>>> 2) have you tried to removed them and place them a half turn over (180*
>>> turn) their present position
>>>
>>> Check these, report back
>>>
>>> HTH,
>>> T.
>>>
>>> On Thu, Mar 26, 2015 at 1:11 PM, Dean S <predsmaniac@gmail.com> wrote:
>>>
>>>> ​I replaced the front turn signal bulbs with some new ones​,yes they are
>>>> cross refrenced and are correct. They are the original incandescent
>>>> one's(all around the vehicle a 1985 Westy), no LEDS. Now I lost my turn
>>>> signals when the headlamps comes on? Did the Flasher die or???
>>>>
>>>> Thanks DS
>>>>
>>>
>>
>> --
>> "Semper Vigilo, Fortis, Paratus et Fidelis"
>> La Florida 1513
>> http://www.nasa.gov/content/florida-to-louisiana-viewed-from-the-international-space-station/#.VBnXJPldVJs
>>