

| Subject: | Re: Help!!! Won't start |
| From: | Jeremy Stovin |
| Date: | Sat, 18 Apr 2015 17:09:29 -0700 |
I looked under there and everything looked fine. Even tried tapping. Sent from my iPad > On Apr 18, 2015, at 4:35 PM, Jack Reynaert <jack007@COMCAST.NET> wrote: > > There is one wire, slide on, which attaches to the starter... and has come loose on my Westy a few times. > Almost called a tow truck, crawled under and saw it dangling. Plugged it in, and cranked fine. > > Good idea to pinch the connector, so it stays attached better to the spade. Haven't had a problem since. > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Dan N > Sent: Saturday, April 18, 2015 7:20 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Help!!! Won't start > > you could change replace the ignition switch and add a hard start relay at the starter > >> On Sat, Apr 18, 2015 at 3:52 PM, Jeremy Stovin <jjstov@yahoo.com> wrote: >> >> Getting AAA to drag Lola home. But cannot figure out why she worked >> great all day, but tried to start her after parked for 20min and nothing. >> >> Battery seems to be fine. >> Starter replaced last year. >> I hear a click back at the starter but no turnover. >> >> Previous problem that is likely related. Since the new starter, turn >> the key, one turn, pause and then it turns again and starts no problem. >> >> Any ideas!!?? Anything that can get me started before the tie truck >> gets here? >> >> Note just filled the tank, >> >> Jeremy. 87 Westy >> >> Sent from my iPhone
Have something to add on this topic today? Revive this thread in the forum »