Dennis, what do you mean about "inner to replace the door curtain?"

Also, John, I used (and continue to use when the opportunity arises) the
stuff you get at lower that is a light aluminum flashing with an asphalt
backing, $17.00 per roll much cheaper than the audio products and does
pretty much the same thing. I have done my doors, slider, back hatch,
sidewalls, and engine lid cover as well as the whole area under the back
bench.

Yesterday I put a new luggage rack seal on my westy and found there was
room for 3/8 inch of closed cell poly foam to go between the rack and the
roof of the car, so I taped a large piece in place under the fiberglass
rack. I haven't had a chance to drive it yet but I know the rank generates
its own wind noise, and besides the cabin can always use a little less heat
from the sun.

I  will put the peel-and stick stuff on the inside the next time I have the
front headliner out.

Dennis is right, stick-on mat sure makes the doors sound better.

JIm

On Sun, May 24, 2015 at 7:49 AM Dennis Haynes <d23haynes57@hotmail.com>
wrote:

> Check out the choices at
>
> http://www.onlinecarstereo.com/products/50/Installation_Accessories/Sound_Damping.aspx?Brand=Dynamat
>
> They have reasonable prices for the good stuff. The light or 1/8 products
> work well for the doors and front cowl. The front and sliding doors will
> get you the biggest improvement. Consider the choice of installation. Your
> car apply directly to the outer skin which stops the cymbal and ringing
> noises. Inside to replace the door curtain. Or you could do both as I did.
> The first choice really changes the sound and feel of the doors when
> opening-closing. Instant Lexus.
>
> Dennis
>
>
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
> Of John Rodgers
> Sent: Sunday, May 24, 2015 12:58 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Sound deadening
>
> The time has come when I MUST do something about the noise level in my '88
> GL. I seem to recall some discussion about a product at Home Depot or Lowes
> that works. I'm sure theres others. Anyone know it's name? Any other
> suggestions as to what to use.
>
> Thanks..
>
> John
>