

| Subject: | Re: Cleaning pop top flocking? |
| From: | Marc Perdue |
| Date: | Sun, 7 Jun 2015 21:17:40 -0400 |
I did this recently. I used a mix of Clorox, detergent, and water in a spray bottle. Then I brushed the entire surface with a nail brush, because it's very soft and won't damage the flocking. After I cleaned the mold out, I sprayed it with water, blotted it, and left it open for a few sunny days. It looks much better now. Marc Perdue On Sun, Jun 7, 2015 at 8:42 PM, Alistair Bell <albell@shaw.ca> wrote: > Yes, blotting or dabbing with towel is safer. > > Alistair > > > >> On Jun 7, 2015, at 5:36 PM, Jim Felder <jim.felder@GMAIL.COM> wrote: >> >> Be careful. I used a bleachy cleaner some years back, and the flocking >> wiped off in a few places from wiping it while wet. >> >> Jim >> >>> On Sun, Jun 7, 2015 at 7:30 PM Jeff Palmer <jpalmer@mymts.net> wrote: >>> >>> Yes should've mentioned it. A tiny bit of mould, also on the canvas. I >>> guess something with bleach will be necessary but I hope it doesn't >>> discolour anything. >>> >>> Jeff >>> >>> Sent from my iPhone >>> >>>> On Jun 7, 2015, at 6:52 PM, Alistair Bell <albell@shaw.ca> wrote: >>>> >>>> I think you may have mould in the flocking. Some folk favour tilex or >>> the like, I've used a solution of household bleach and water. It finest >>> have to be a strong solution. >>>> >>>> When I have done it, I chose a warm day, had the van out of the sun ( >>> dont want the pop top hot and volatilizing the chlorine, we're not doing a >>> WWI trench re-enactment). >>>> >>>> I covered the top bunk and the kitchen with plastic sheeting. Used a >>> spray bottle with the bleach solution, and had at it. >>>> >>>> After 5 or 10 minutes I blotted off as much as I could with a towel, >>> then sprayed again with plain water. Then another blotting. Rinse and >>> repeat as much as you feel like. >>>> >>>> It's a pain in the donkey, and you might have some residual bleach >>> smell. That can bring back nostalgic memories of over chlorinated swimming >>> pools. >>>> >>>> My memory fails me right now, but I believe there is a less toxic mould >>> remover on the market. Whether it works as well as bleach I can't say. >>>> >>>> Alistair >>>> >>>> >>>> >>>>> On Jun 7, 2015, at 4:01 PM, Jeff Palmer <jpalmer@MYMTS.NET> wrote: >>>>> >>>>> Can someone remind me the best way to clean the underside of the >>> fibreglass top? It got a bit moist and water has discoloured it. >>>>> >>>>> Thanks >>>>> Jeff >>>>> >>>>> Sent from my iPhone >>>
Have something to add on this topic today? Revive this thread in the forum »