

| Subject: | Re: Changes to a '90 Westy |
| From: | Jack Reynaert |
| Date: | Wed, 17 Jun 2015 18:50:44 -0400 |
Agree with everyone else, leave it in! The most common failure point is the pressure side line from the compressor to the front of the van. Change that, and you will likely hold a charge... and always replace the receiver/dryer whenever your system has been dead for a while. -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Neil2 Sent: Wednesday, June 17, 2015 4:19 PM To: vanagon@GERRY.VANAGON.COM Subject: Changes to a '90 Westy I've got a non-working AC in my Westy and wondered about pulling it out but am concerned about the interior appearance afterward. For those of you who've seen/done one after the pull, did it look presentable or was there a lot of cosmetic rework required? Please/thanks! -- Neil2 '82 Diesel Westfalia (Ducky) '86 Vanagon/Westfalia Wannabe (SaVannah) '08 170" 2500 Mega Roof Dodge Sprinter (Moby) '90 Westfalia Subagon Fulltiming since August 2008 Nunquam Pendite Divendium
Have something to add on this topic today? Revive this thread in the forum »