

| Subject: | Re: [T2] RAINING IN BALTIMORE |
| From: | Raceing Cajun |
| Date: | Fri, 26 Jun 2015 15:17:37 -0500 |
Stop chasing your tail........ Go back to the basics. If you are using all the formerly running accessories off the old engine. You most likely have an installation problem. Like the "BAD GAS", all four injectors are not going to fail at once. Pull one and see if you have spray. You can buy a can of "volatile" (some are non-flammable) carburetor cleaner or brake cleaner spray, with a "straw" that attaches to the nozzle. Loosen the intake boot, and push the straw under it, spray a little in the intake and give it a spin. I'm with you, stay away from diesel starting fluid. Remember all these cleaners are gas's, and are heaver than air, and will sink to low spots in/on the engine, they puddle until they get a spark and K-POW! I would place a pretty good fan blowing on the engine during this process. Skipper >Subject: Re: [T2] RAINING IN BALTIMORE
Have something to add on this topic today? Revive this thread in the forum »