as it now you have... from the inside remove the upper left corner of the
panel enoguh to get your in it then pull the the plunger rod up...

or slim-jim it but I don't know how to do it...

On Tue, Jul 7, 2015 at 12:15 PM, KIM BRENNAN <kimbrennan@mac.com> wrote:

> If the plunger won’t budge you’ve got a problem. The normal issue is that
> the lock gets dirty. This can be resolved by removing the outside handle,
> but this will require the door to be open as you need to remove a couple of
> screws that are hidden by the rubber door gasket.
>
> Then you can disassemble the door lock mech and clean, just be very
> careful if you remove the brass inserts, and make a note which slots they
> go in.
>
>
> > On Jul 7, 2015, at 2:55 PM, Dake Collins <wuwe423@YAHOO.COM> wrote:
> >
> > My drivers side door (’86 Westy) is locked; the key won’t turn the
> tumbler and the plunger won’t budge. Any ideas on how to resolve this
> problem?
> > thanks.
>