

| Subject: | Re: Trip and tire report |
| From: | Dennis Haynes |
| Date: | Tue, 7 Jul 2015 21:15:44 -0400 |
I have done many an oil cooler set up this way. Fun Bus has been running with a 16 plate cooler in front of the radiator since it was near new. At 283K and the motor has never been opened I consider the installation successful. It still gives 40-45 psi oil pressure cruising and the oil temp is normally between 180-190F. In real hot weather with AC and 70-75 mph cruising the oil temp will climb to 210 or a bit higher. In extremes like mountain climbs in lower gears I have even hot 240f with this set up. Still no oil pressure warning buzzers or flickering warning light at idle. I still usually see 10-15 psi at idle. I am using a combination of 1/2 inch hose and 5/8" copper tube. Compared to the size of the galleys and ports in the engine the pressure drop is small and the lower temperatures more than compensate. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Dan N Sent: Tuesday, July 7, 2015 1:55 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: Trip and tire report if you put up in the front... you may lose oil pressure because of length of hoses...
Have something to add on this topic today? Revive this thread in the forum »