Somebody send me a link on the HEPU (which is what servers in a serving
line at a cafeteria say to you here in Alabama, by the way)? I use
Craftsman wobble extensions, the kind you snap into the socket and it
allows maybe 15 degrees of movement all around, good for most things. I
also have the U-joint type adapter as well as an entire set with the
U-joint as part of the socket itself. Amazingly I have had the U-joint
sockets and adapter for going on 45 years, and while they are amazingly in
good shape for something that finicky that gets so much load put on it, I
hate them. If it needs a flexible connection it is probably out of normal
reach, and the U-joint style just flop completely over. Very frustrating to
work with on long extensions especially. You might want to replace really
touch bolts with allen head bolts that you can reach with a ball head allen
socket.

Jim

On Fri, Jul 31, 2015 at 12:38 PM Roy Nicholl <RNicholl@nbnet.nb.ca> wrote:

> I'll tackle it with my flex sockets this time around as I cannot seem to
> locate a "wobble" locally.
>
> I'll also order the HEPU ... seems Frank is out of stock (and on
> vacation), so I may need to bring it in through the FLAPS.
>
>
> On 31-Jul-2015, at 13:30, Neil N wrote:
>
> > I used a Hepu. This seems to be the choice.
> > "wobble extension"
> >
> http://www.harborfreight.com/3-piece-3-8-eighth-inch-drive-impact-wobble-socket-extension-set-67065.html
> > also
> > http://www.harborfreight.com/9-pc-wobble-socket-extension-set-67971.html
> >
> > On Fri, Jul 31, 2015 at 6:24 AM, Roy Nicholl <RNicholl@nbnet.nb.ca>
> wrote:
> >
> > All,
> >>
> >> On the water pumps I have located, I have found:
> >>
> >> "025 121 010 D"  - FLAPs guy thinks the brand/manufacturer is GRAF
> >> "025 121 010 F"  - brand is HEPU
> >>
> >>
>