

| Subject: | Re: A/C fan and burning smell |
| From: | Jim Felder |
| Date: | Mon, 10 Aug 2015 21:44:34 +0000 |
There is a metal piece up there behind the switches that serves the same purpose as the dashboard metal. I just went out and looked at the spares I have boxed up and they are all the same. Jim On Mon, Aug 10, 2015 at 4:18 PM Larry Alofs <lalofs@gmail.com> wrote: > I forgot that you have an '87 with the knobs up above. I don't recall how > hard it is to get to the back of those. On my '91 there is access from > under the dash. > Maybe someone else can advise about the overhead ones. > > Larry A. > > > On Mon, Aug 10, 2015 at 5:12 PM, sailingfc dslextreme.com < > sailingfc@dslextreme.com> wrote: > > > I'll check all this out when I get home tonight. Do I drop the front > > overhead plastic plenum or do the switches come out through the plastic? > > > > -Dick- > > > > > > ----- Original Message ----- > > From: Larry Alofs <lalofs@gmail.com> > > To: sailingfc dslextreme.com <sailingfc@dslextreme.com> > > Cc: vanagonlist a <vanagon@gerry.vanagon.com> > > Sent: Mon, 10 Aug 2015 17:03:52 -0400 (EDT) > > Subject: Re: A/C fan and burning smell > > > > You can pull the connector off the back of the switch and use a paper > clip > > to run the fan on various speeds. We once drove from Austin to Atlanta > > that way with the fan on "3" when the switch crapped out. The paper clip > > did get sort of hot... > > > > Larry A. > > > > > > On Mon, Aug 10, 2015 at 2:39 PM, sailingfc dslextreme.com< > > sailingfc@dslextreme.com> wrote: > > > >> 1987 Vanagon GL Syncro tin-top. Overhead controls and ductwork, A/C > >> system. > >> > >> 1. Fan speed "3" does not work. Everything is still on, just no fan. > >> "1", "2" and "4" fan speeds work. Where do I start looking for > this > >> problem? > >> > >> 2. When I switch fan speed to "4", I start getting a burning smell from > >> the vents. When I go back down to "1" or "2", smell eventually goes > away > >> and runs fine all day long. I opened the driver side A/C rear > panel > >> and see/smell no burnt items among the wires and relays. Do you think > this > >> smell is coming from the evaporator coil area or the control knob area > in > >> front? > >> > >> > >> Thanks. > >> > >> -Dick- > >> > > > > > > > > >
Have something to add on this topic today? Revive this thread in the forum »