Here's the size that the owner was able to find on the Mercedes wheels I
wrote about earlier:

7 1/4 X 16 ET 51

Thanks for all your help,

Jim

On Sat, Aug 22, 2015 at 5:47 AM Max Wellhouse <dimwittedmoose@cfu.net>
wrote:

> I bought a set off a 98 CLK and other than reaming out the stud holes to
> 14mm, the center hubs needed no "work" to fit over the protrusions like the
> Audi wheels do..  I bought the longer studs form T3 in case I did need
> spacers up front, but that was notneeded.  Th rears needed no mods at all.
> Of all the wheel options within y price range, these were certanly the best
> looking and highest quality rims out there  IMHO.  I've been very happy
> with them  I have 215/65/16 Continental Vanco II tires, and 8Ply rating
> makes for a rough ride, but ya live and learn....
>
> DM&FS
>
>
>
> ----- Original Message -----
> From: "vw_van_fan_Mark" <madvws@COX.NET>
> To: "vanagon@GERRY.VANAGON.COM" <vanagon@GERRY.VANAGON.COM>
> Sent: Friday, August 21, 2015 5:41:17 PM
> Subject: Re: Mercedes 16 inch wheels for Vanagon?
>
> With 7" x 16" and ET37 you can run them without any spacers, depending
> on the tires. I am running 215/65/16 on 2wd vans with no spacers. I did
> file the edge on the upper control arms slightly, no big deal.
>
> If wider than 7.0" or wider tire than 215 you can expect to need spacers
> with ET37 rims.
>
> 7x16 with ET37 is a somewhat common Mercedes size from C class cars.
>
> Mark
>
>
> Chris Szpejankowski wrote:
> > Jim, get the wheel size and offset (ET) and post them here. We will be
> able to tell you what might work.
> >
> > Forged Mercedes CLK wheels are the way to, though. They are lighter than
> 14'' steel wheels  .  10mm spacers up front and you can run 225/60R16 tires.
> >
> >
>