I recently thought I had a leak from that crank seal but it turned out to
be from the oil breather at the top of the engine. Oil was leaking there
and running down the block. Try cleaning the old leaked oil off and seeing
if you can determine exactly where is the source of the leak.

I have since found and repaired 2 more oil leaks, one from a missing
dipstick tube o-ring and one from an old o-ring on the distributor shaft.

-Mark

On Mon, Aug 31, 2015 at 6:36 AM, John Rodgers <jrodgers113@gmail.com> wrote:

> Can't really see it, but oil is dripping out undernearh the pulley. Pretty
> sure it's the seal. Is it possible to replace the seal without pulling the
> engine? It's a buggar to get at. And how would one go about it?
>
> Thanks,
>
> John
>