hi tim...
on the turn signal socket wires ..
the normal and clever way to find out which wire is which is just put a
simple 12 volt test light on them ..
and out which wire has parking light voltage on it, which has turn
signal voltage on it , etc.
The brown in ground of course.
This is even easier to do than posting a question online !!

And of course the Bentley manual wiring diagrams are useful ..
and sometimes not that hard to use.
on the rad fan ..I've never had occasion to need to know which wire is
which ..
as they are never ( normally anyway ) removed from the plug they clip into.

On 9/24/2015 9:51 AM, Tim wrote:
> i am looking to finish up on some work on my van that has been sitting
> for over one year after a 2.5 Subie transplant.
>
> I have a request for wiring assistance as I can't seem to get the info i
> need from the wiring diagram.
>
> My questions are:
>
> for the front turn signals there are three wires, black/green,red/grey
> and brown. i have three terminals on the lightbulb socket BL, 58 and
> unlabeled (enter).
>
> Can someone tell me which wire gets connected to which terminal.
>
>
> Also for the Radiator fan switch, i have a three terminal green switch
> with a notch on the upper side and three wires white/red,black/red and
> blue/red.
>
> Again i would request assistance in identifying the connection order.
> Thanks
>
> Tim
>