I would install the oil cooler, and snug down the nut that holds it a
little ..
at first,
then get the hoses on so there's no tension or stress on them,
and after those are in place perfectly, tighten the 27mm nut to final
torque.

if that's what you mean.
just do nice careful work.
scott

On 10/4/2015 4:49 PM, John Rodgers wrote:
> The water pump and adjoining plumbing is all in place. Just wondering if
> there is an order for reinstalling the oil  cooler that would make it
> easier.
>
> John
>