Since I am at work and don't have my vanagon here...oh wait I did drive it
today.

But anyway, I just searched Yahoo for "Vanagon 2.1 engine" and looked at
the "images".  Shows the pulley next to the Case as having both the
Alternator and waterpump on it.  Next...moving toward the rear would be
the a/c and then the power steering pump.

Pat

From:   John Rodgers <jrodgers113@GMAIL.COM>
To:     vanagon@GERRY.VANAGON.COM
Date:   10/09/2015 02:53 PM
Subject:        Re: Water pump project -2.1L w/ AC- multi groove crank
pulley
Sent by:        Vanagon Mailing List <vanagon@gerry.vanagon.com>

Thanks, but doesn't tell me what I need to know.

Going from next to the case to the rear of the car - the crankshaft pulley
has three gooves. Which groove serves what pulley belt to what appliance?
Is the rear most pulley for the PS pump. Which serves the water pump and
is
it just one belt for the pump and something else, or is the water pump on
a
belt by itsef, which would seem to be the way. I'm really confused. I want
to leave the AC off if possible. I'm having to put the old belts back on
and can't read the markings.

Thanks

John
On Oct 9, 2015 16:41, "Dan N" <dn92610@gmail.com> wrote:

> Continental belts
>
> AVX 10x1100 to Alternator
>
> AVX 10x1075 to Power Steering
>
> AVX 13x1155 to Air Conditioning
>