

| Subject: | Re: Propane refill adaptor |
| From: | Dennis Haynes |
| Date: | Tue, 20 Oct 2015 23:48:49 -0400 |
What you really want is the "Extend-A-Stay" set up that goes between the tank outlet valve and the regulator. They have fittings to use both the disposable and other tanks to extend your stay. They also have fittings to use that on board tank for your BBQ grill or propane stove. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Edward Maglott Sent: Tuesday, October 20, 2015 4:28 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Propane refill adaptor I've long puzzled about a way to temporarily connect a portable tank to the fill valve as a way to get me by when the tank goes empty on a trip. I purchased a fitting to go on the fill valve and was going to rig up something just like this and test it out next time my tank goes empty. There was some question about if the pressure in the dispo tank would be enough to push open the fill valve. 2 burning questions I have: 1.) When a propane station connects to the tank, does the nozzle physically push the fill valve open or is it the pressure of pumping liquid propane that opens it? 2.) Then basically the same question about this gadget. if this thing physically opens the valve, that's fine when your tank is empty and you are hooking it up, but once some liquid propane has gone from dispo tank to westy tank... how do you disconnect it? You'd have to disconnect both tanks simultaneously and still would get quite a bit of gas release. Edward On Tue, Oct 20, 2015 at 4:00 PM, Dennis Jowell <dennisjowell@gmail.com> wrote: > I always have 2-1 lb canisters onboard our Westy for our small propane > grille we use outside the camper. I could use any residue left in the > 1 lb for our grille. So the consensus from our list members is that it > would work? I thought about the extend -a-stay but was concerned > about adding more plumbing to the existing tank. > > Dennis Jowell > Scotch Hollow Farm > Newbury, Vermont > >
Have something to add on this topic today? Revive this thread in the forum »