There is little option for where the brackets are placed.  Moving the
awning back and forth would require drilling of the awning case again the
same as in any initial install, the awning case is bolted to the brackets.
Given that yes, the awning could be re-positioned if you didn't like where
it was mounted.

On Sun, Nov 15, 2015 at 3:32 PM, Dennis Jowell <dennisjowell@gmail.com>
wrote:

> Loren,
> If I just use the bolt on brackets ( I'll order 3 when place an order)
> I'll be able to reposition the Fiamma if needed?
>
> Dennis Jowell
> Scotch Hollow Farm
> Newbury, Vermont
>
>
> On Nov 15, 2015, at 2:00 PM, Loren Busch <starwagen@gmail.com> wrote:
>
> ​RE: Mounting a Fiamma
> My 10' Fiamma has been mounted without the bolts to the body of the van
> for well over 10 years.  And 100,000 miles.  I used two mounting brackets
> for many years but added a third about three years ago.  And have had no
> problems with not having the brackets bolted to the body.  BUT I have
> thought about doing that even though the three bracket setup is solid.  YMMV
>
>