I've never been able to get at that bolt without removing the bumper, but you might get lucky!

My '85 as rubber strips covering the bumper bolts, so that means replacing at least half of the clips when I pull them off.

Stuart

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jim Felder
Sent: Monday, January 04, 2016 4:15 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Bumper end cap how to?

Pry out the plug that conceals the phillips screw into the body panel. From the end or from the bottom you could be able to get a 13mm socket on the carriage bolt from the back.

Jim

On Mon, Jan 4, 2016 at 5:45 PM Tyler Hardison <tyler@seraph-net.net> wrote:

> Does anyone have a handy how to for the front bumper end caps? I can't 
> seem to figure out how to get to the large carriage bolt out...
>