At 08:31 PM 1/7/2016, Dennis Haynes wrote:
>For the spindles some 84s had the power steering. I believe there is
>a split in 85 where the inner diameter of the outer bearing was
>changed. So for the early spindles you need to match the tie rod
>connection and the axle. For 86 and later the only difference is for
>the presence of power steering.

Outer bearing changed from 19.05 mm (.750 in) I.D. to 22 mm as of VIN
24-E-024 828 (early '84 model).  P/N for the steering knuckle did not change.

Yrs,
d