Give McMaster Carr a call. They are really good at finding oddball stuff.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Karl Wolz
Sent: Sunday, January 31, 2016 12:50 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Looking for 4mm by 1.0 threads per mm tap

These are the screws that hold the wiper assembly to the dash valance(?).

Karl Wolz
Sent from my electronic umbilicus

> On Jan 30, 2016, at 10:41 PM, Dennis Haynes <d23haynes57@hotmail.com>
wrote:
>
> McMaster Carr has most anything. For M4 I am only familiar with .7 and
> .75 pitch. M6 is available in 1.0, .75, and .5.
>
> Dennis
>
>
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On
> Behalf Of Karl Wolz
> Sent: Saturday, January 30, 2016 11:51 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Looking for 4mm by 1.0 threads per mm tap
>
> All I've found are finer threads. This is for the windshield wiper
assembly.
> Any ideas?  Tried HF and Sears and Home Depot. They all have finer
> thread taps.
>
> Karl Wolz
> Sent from my electronic umbilicus