BTW, the one I linked to is 12 ga, and it will work fine if you can't find a 10 ga because it's a very short run of the lighter wire. 

Stuart

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Steven Shelton
Sent: Wednesday, February 10, 2016 1:31 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: PS pump switch, engine compartment wiring harness, ECU, starter

Does anybody know what gauge wire this is?  I was thinking of ordering one of these:
http://www.powerwerx.com/fuses-circuit-protection/crimpable-inline-atc-ato-blade-fuse-holder.html#desc
.

On Wed, Feb 10, 2016 at 3:52 PM, Gene P <olgreywoof@gmail.com> wrote:

> David B's original note is in the archives 7/28/2012
>
> http://gerry.vanagon.com/cgi-bin/wa.exe?A2=ind1207D&L=vanagon&P=R10116
> &m=441390
>
> Inside the wiring box at the front of the engine compartment, there is 
> a fat red wire coming off a post.  Snip it and splice in an inline fuse.
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On 
> Behalf Of Mark Milby
> Sent: Wednesday, February 10, 2016 9:56 AM
>
> Does anyone have some pictures of what they have done now that you 
> guys have got the S%$t scared out of me.
>