

| Subject: | Re: Vacuum leak |
| From: | thewestyman |
| Date: | Tue, 16 Feb 2016 13:14:47 -0800 |
Once I found the same problem. That big black plastic pipe had a damage on that looked like some kind of melting and it was intermittent somehow. But I fixed it by cutting and gluing in a piece of pipe between. I must say, it was very hard to find this one because that melted part was swinging back and forth, opening and closing. But I got the bastard eventually, Zoltan -----Original Message----- From: kenneth wilford (Van-Again) Sent: Tuesday, February 16, 2016 12:44 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Vacuum leak Yes follow the vacuum line from the intake through the firewall. Sounds like it is leaking where you can't see on the back side of the firewall. Ken On Tue, Feb 16, 2016 at 3:16 PM, John Rodgers <jrodgers113@gmail.com> wrote: > Have hard pedal. No brakes to speak off. Dennis Haynes said suspect a > vacuum leak. Have just gone over as best I could the vacuum lines in the > engine compartment. With the engine at idle I hear a very distinct sound > like someone drawing kn a deep breath. That to me is like air being wher > it > shouldn't. The noise is in the vicinity of the thermostat housing, but I > can't pinpoint it exactly. Is there any kind of vacuum line or device in > that area that I might be missing? It's fairly loud. > > John > -- Thanks, Ken Wilford John 3:16 www.vanagain.com
Have something to add on this topic today? Revive this thread in the forum »