Thanks Dean,

I did a fuel-tank reseal kit while I was replacing the tank. I'm 100% sure
that I didn't do the fuel sending unit correctly. :-)

On Mon, Apr 4, 2016 at 1:52 PM, OlRivrRat <OlRivrRat@comcast.net> wrote:

> On 7 Jul , 2012, at 10:52 PM, neil n wrote:
>
> > I doubt that's the case though.
>
>         Actually, That is one of the 1st things I'd suspect ~ If one is
> not Vanagon FuelTankDrop Savvy
>
> so as to know that the CrossOverPipe is attached to the Underside of the
> body by a HoseHanger, it is
>
> QuitePossible to Pull one of the CrossOver to Tank Fittings out of the
> Tank or even Break 1 ~ Those
>
> Fittings can be Seen or Felt by Looking/Reaching in through the WheelWell
> behind the tire over the
>
> Frame ~ With My long Skinny Arms & Hands I have actually performed a
> Replacement of a Few C'O's
>
> & Grommets from the WheelWells with out dropping the Tank ~
>
>
>               ORR~ DeanB
>