John, there is NO adjustment.  Your problem is most likely the bracket for the slave cylinder is moving on the bell housing due to the mounting area being corroded.  Kinda hard to fix without finding a good used bell housing or one of my rebuilt bell housings:  <http://www.frankcondelli.com/staging1/store/index.php?route=product/product&path=61_112_120&product_id=1005>

> On Apr 1, 2016, at 11:00 PM, Automatic digest processor <LISTSERV@GERRY.VANAGON.COM> wrote:
> 
> I have a newly installed clutch, but the throw is not right. Press the
> clutch pedal  and it doesn't disengage until nearly to the floor. The van
> will creep if you are not really careful to keep that pedal hard to the
> floor. This is very tiring to a shortlegged fellow like me. I'd like to
> know how to adjust that up and still getting good clean engagement and
> disengagement.

      Please note that I will be away from my business travelling from November 16 until April 30, 2016.  Parts orders will be processed although not as quickly as usual.  I will always be available for contact by E-mail.  If you phone your call will be addressed by Steven and he will either call you back or advise you to contact me directly by E-mail.  

Cheers, 
   
Frank Condelli
Almonte, Ontario, Canada
'87 VW Westy, '00 Kawasaki 250 Sherpa, "98 Ducati 750 Monster & Lionel Trains (Collection for sale <http://frankcondelli.com/trainsal.htm>)
Frank Condelli & Associates <http://www.frankcondelli.com/> - Vanagon/Vanagon Westfalia Service in the Ottawa Valley
BusFusion <http://www.busfusion.com/> a VW Camper camping event, Almonte, ON, June 02 ~ 05, 2016