OK, after cleaning the contacts, the low speed fan is coming on when  I let get hot enough.  Since replacing the radiator, coolant pipes, water pumpt, etc it takes a LONG time to get the needle to pass the LED enough for the fan to come on.

I will investigate the fuses.   Where can I apply 12V to test the fan motor?

Thanks,
Bryan

From: Dennis Haynes
Sent: Saturday, April 23, 2016 2:44 PM
To: 'B Feddish'; vanagon@GERRY.VANAGON.COM
Subject: RE: Cooling fan not coming on

The high speed fan uses a relay on the fuse box. Don’t remember the fuse number. Check fuse 1 also. Can also be a bad fan motor. 

Dennis

From: B Feddish [mailto:uprightbassghost@hotmail.com] 
Sent: Saturday, April 23, 2016 1:38 PM
To: Dennis Haynes <d23haynes57@hotmail.com>; 'B Feddish' <uprightbassghost@HOTMAIL.COM>; vanagon@GERRY.VANAGON.COM
Subject: RE: Cooling fan not coming on

OK, I’m getting low speed fan when I jumper the end and middle, jumping the 2 ends does not turn on the high speed fan.  The fuse is OK.  Next step?