Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Powerflex transaxle bushing
From:Ralph Meyermann
Date:Fri, 29 Apr 2016 08:41:19 -0500

Nothing more than my normal Diesel vibration
On Apr 29, 2016 8:40 AM, "vanagongl85" <vanagongl85@gmail.com> wrote:

>
> Good to hear! I have one of those sitting in my garage awaiting
> installation.
> Have you notice any additional vibration due to the firmer mount?
> Joe T.
> -------- Original message --------From: Ralph Meyermann <
> ralphmeyermann@GMAIL.COM> Date: 4/29/16  7:27 AM  (GMT-07:00) To:
> vanagon@GERRY.VANAGON.COM Subject: Re: Powerflex transaxle bushing
> Chris at www.t3technique.com  they have one for diesel's like mine and
> another for wbx. Thinking 2wd only, manual trans and not sure on automatic
> application. It was about $55+ shipping
> On Apr 29, 2016 8:17 AM, "John Rodgers" <jrodgers113@gmail.com> wrote:
>
> > Where does that come from? And will it fit the non-syncro model van with
> > the 2.1L engine?
> > On Apr 29, 2016 07:44, "Ralph Meyermann" <ralphmeyermann@gmail.com>
> wrote:
> >
> >> Hi Volks, long time without posting. I was noticing what I deemed
> >> excessive
> >> shifter movement going from throttle to no throttle. I just installed
> the
> >> powerflex bushing to replace possibly the original bushing my van came
> >> with
> >> and noticed a magical improvement! I believe that was money well spent!
> >> Now
> >> about a half inch of movement compared to about 1.5"-2" movement before.
> >>
> >
>