Thanks Scott. I'll get some of that Permatex.
Likely I misunderstood what was meant by 'add grease to lip of seal.'
or similar phrase.
I did, however, clean the area where seal seats with brake parts cleaner.

Meh. So much to learn!

On 5/9/16, Scott <SCOTTDANIEL@turbovans.com> wrote:
> i always install  seals dry on the outside ..
> bare seal-to-metal housing.
>
> the last thing I would do is lubricate that spot ..the seal wants to
> slide out.
>
> even my 'favourite mult=purpose goop of all time' ...
> sticky Permatex High Tack gasket sealer, will help the seal slide out.
>
> bare clean metal against seal.  I clean the metal part with carb cleaner
> or similar.
> Lacquer thinner would be idea.
>
> Scott

--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>