

| Subject: | Re: Frequency recommendation to replace Vanagon fuel gasoline lines |
| From: | Jon VonOhlsen |
| Date: | Tue, 10 May 2016 08:33:55 -0600 |
I redid all the hoses with the updated Continental fuel line, similar to others like BMW, and used Oetiker high pressure clamps. These need a special tool, but seem to work well and don't cut the fuel line. One shot, though, these are not a screw type, just like OEM. Got a kit from Belmetric. Jon On 5/9/2016 1:56 AM, John Rodgers wrote: > I agree! Use the BMW 8mm hose and the stainless fuel hose clamps. Last time > I did this I got my stuff from Van Cafe. The other list vendors probably > carry this as well. When ordering, be specific. Those fuel hose clamps must > have the rdges curled to the outside of the clamp so as not to cut the > hose. Be sure thats what you are getting. > > John > On May 9, 2016 02:39, "thewestyman" <zolo@foxinternet.net> wrote: > >> That's why I never used that crap. I use the BMW German 8 mm. It is >> supplied by a wholesaler. Usually I buy 5 meter length. >> Furthermore, I leave out the firewall connection and the plastic line and >> go >> straight to the fuel pump. And use stainless fuel line clamps. >> >> The original lasted 30 years mostly. It's time to change, of course. For >> price expectation, I charge $250 all inclusive. It is about a 3.5 hour >> job. >> So, others should not ask much more either. It should last 20 years, I >> think. >> >> Zoltan >> >> >> >> -----Original Message----- >> From: Stuart Fedak >> Sent: Sunday, May 08, 2016 5:46 PM >> To: vanagon@GERRY.VANAGON.COM >> Subject: Frequency recommendation to replace Vanagon fuel gasoline lines >> >> I have a 1986 VW Vanagon Westfalia GL camper 2.1 L 2WD auto. In 2013 I >> replaced all the gasoline fuel lines with new German rubber gasoline line >> ( fabric coated ) that was obtained from a local Canadian supplier. This >> spring, I noted a leak where the line from the fuel pump splits to feed the >> two sets of fuel injectors. The rubber gasoline line split from the end >> where it was cut to length. The splits went into the area where the lines >> were clamped, and then past the stainless clamps. I replaced that fuel >> line and then yesterday the connection by the fuel pump was leaking. I >> replaced that one and this morning the other line from where the fuel line >> from the fuel pump splits to fed the two sets of fuel injectors was now >> leaking. >> >> Questions: What is a normal life expectancy for fuel lines in the Vanagon? >> Should these lines be replaced every 2-3 years? Are certain brands or >> sources of fuel lines known to be better or worse. Will taping the ends of >> the gasoline fuel lines slow up the splitting of the rubber? Could this be >> caused by a fault with the fuel pressure regulator? >> >> Any other tips? >> >> I do not mind replacing these lines on a regular schedule. It is not a >> difficult task to do as preventative maintenance, at home. Having a leak >> or fire on the road is not good. >> >> Your thoughts? >> >> Stuart >> >> Sent by telegraphy via an analogue to digital interface to a rotary phone >> to >> my dialup 1200 baud modem. ☮ ☮ ☮ PEACE ☮ ☮ ☮= >>
Have something to add on this topic today? Revive this thread in the forum »