Awesome!  Thanks very much.

I guess I got tired of flipping pages too soon.

Cheers,
Steve W.

On 22/05/2016 10:05 PM, OlRivrRat wrote:
>       Bentley @ 97.241 ~
>
>
> On 22 May , 2016, at 9:19 PM, Steve Williams wrote:
>
>> Hi,
>>
>> <posted on FB as well>
>>
>> I've got a Canadian 1991 Westy with daytime running lights.
>>
>> Several years ago I installed the headlight relay kit following the
>> instructions and not really understanding what was being done. I sat
>> down with the Bentley this rainy afternoon, took my fuse panel off the
>> firewall & sat down to truly understand. It all made sense until I
>> disconnected both relays and STILL had low beams.
>>
>> It took a while, but I finallyhad an epiphany and realized the wiring
>> diagram in the Bentley didn't take into consideration the fact my van
>> (Canadian requirement?) has daytime running lights.
>>
>> Does anyone have any references how the DRL's are wired? It does seem to
>> not run the low beam filament at the same power (voltage) as when the
>> headlights are turned on, but that might be just because the DRL's
>> aren't running through a relay & the low beams are.
>>
>> Also, I found a Grey/White wire with a yellow connector loose behind the
>> fuse panel. It doesn't seem to have a mate anywhere to connect it to.
>>  From my reading of the wiring diagram, I think it's the T1o on page
>> 97.205 of the Bently. It's just hanging in space in the Bently, so I
>> guess it's OK to hang in space on my vehicle? It connects to the
>> Digifant Control Unit so that really made me kind of curious...
>>
>>
>> Cheers,
>> Steve W.