Found a rebuild Kit for the slave here:
http://www.busdepot.com/251798041

new one
http://www.busdepot.com/251721263my

and OE one
http://www.busdepot.com/251721263a

But if it's the master you will notice when the van is on and you press the
brake the peddle will slowly go all the way down if it's the Master Cylinder

On Thu, Jun 16, 2016 at 8:36 AM, William <grateful@swcp.com> wrote:

> 1984 vanagon
> Replaced master cylinder around 2004. Fluid was leaking on floor.
> Currently clutch slowly engages with clutch pedal fully depressed.
> I assume the seal on either the master/slave cylinder could be worn.
> The slave cylinder appears to be easier than the master cylinder
> replacement.
> Replace slave first, then if needed, replace the master again?
>
> Anyone know where I could purchase new/rebuilt slave?
>
> Thanks!
>
> --
> William
>
> Live a balanced life. Learn some and think some, and draw and paint
> and sing and dance and play and work every day some.
> -Robert Fulghum, author (b. 1937)
>