I'll find out as soon as I get it apart but not until I get the new hall sensor to understand what has to happen . Should be sometime next week. 

Dennis J

Dennis Jowell
Scotch Hollow Farm
Newbury, Vermont 

> On Jun 28, 2016, at 12:35 PM, Neil N <musomuso@gmail.com> wrote:
> 
> Way to go!
> 
> the pin on dizzy is not too hard to remove. Here's a pic of what I did:
> 
> http://tinyurl.com/hg2jaqp
> 
> its just a piece of annealed copper pipe. I supported other end of
> dizzy with piece of wood.
> 
> Are the small wires inside dizzy, to hall, at fault?
> 
> 
> 
>> On 6/28/16, Dennis Jowell <dennisjowell@gmail.com> wrote:
>> 
>> I found the problem! Worn out Hall Sensor. I added a zip tie to the plug on
>> the distributor not the harness. Starts right up. Thanks to the suggestion
>> from a Van Cafe old time mechanic and Chris their customer service person.
>> I have a new Hall Sensor ordered. Should have it here at the farm this
>> week.
> 
> -- 
> Neil n
> 
> Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>
> 
> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>
> 
> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>
> 
> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>