I hope I haven't advised the other Dennis incorrectly via private email.

One measures O2 voltage while it's still connected to ECU?
(O2 black wire still connected to green wire)

http://www.ngk.com.au/oxygen-sensors/technical-information/how-to-test-oxygen-sensors

On 6/25/16, Dennis Haynes <d23haynes57@hotmail.com> wrote:

> That voltage is a tad low bit indicates you don't have a short.

> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Dennis Jowell
> Sent: Friday, June 24, 2016 1:38 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: GOWESTY AFM no start problem
>
> O2 Green wire to braided wire with ignition on is .44 VDC is this correct ?

--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>