An ignition switch with a bad "X" contact will also cause other problems such as heater fans and other accessories not working. Pulling the high beam switch bypasses the ignition switch to blink the high beams. This is another test. 

The headlight grounds share a common terminal at the ground star above the fuse box. It is common for this connection to overheat, corrode and fail. An improvement would be to also ground the headlights to the body near where they are mounted. Ring terminals under the bucket mounting screws work well. 

Dennis

 

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jimmy Johnston
Sent: Wednesday, August 31, 2016 7:15 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: No headlights.

how old is your ignition switch...?  a bad one can cause headlight wonkiness

Jimmy
Wilmington, NC

On Mon, Aug 29, 2016 at 11:25 PM, Jeff Palmer <jpalmer@mymts.net> wrote:

> 85 Westfalia with the bus depot relay kit. Upgraded bulbs and lenses too.
>
> Tonight I hit the lights and no headlights. Parking lights work fine 
> on that setting. With the headlights on, I get parking lights plus 
> high beam LED plus orange tail lights. High beam LED won't turn off.
>
> Any thoughts? Headlight switch?
>
> Thanks
> Jeff in Winnipeg
>
> Sent from my iPhone