Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Gowesty starter problems
From:Dennis Haynes
Date:Mon, 5 Sep 2016 08:44:21 -0400

Starters seem to be real hit and miss. Often starter failures are due to
past abuses. Those no starts where the engine was cranked excessively really
have an effect. If the problem was sticking brushes that is often the result
of overheating or contamination getting inside. Let us know what they offer.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Dennis Jowell
Sent: Monday, September 5, 2016 6:25 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Gowesty starter problems

I've  had my Gowesty starter for two years plus for 22,000 miles starter
does not work now. Is this typical of this type a starter? For a while I
noticed that the brushes get stuck then I'll tap the starter and it would
turn over, now that wont work anymore. 12.5 volts a starter. Connections are
clean + light application of dielectric grease. Is there a better starter
out there? Gowesty wants $299 for a new one. I have no idea as far as a
warranty. Will call them tomorrow.
 My Westy is running great except now for the starter.

Dennis Jowell
Scotch Hollow Farm
Newbury, Vermont