I'd think the propane fittings are all SAE?

Where is the leak?

Along with the comment on this image in samba link

http://images.thesamba.com/vw/gallery/pix/1024505.jpg

the back side of a piece of emery cloth can provide a very very
mild polishing surface. Or, use a very worn out piece of 400 wet/dry ?
Bras brand polish has a very mild amount of abrasives and would be appropriate.
I'd clean off the grease first. As a last resort,
I've used Brasso to polish brass instrument (musical) piston cylinders.
If used correctly, it can evenly polish a brass surface but it won't
easily remove
ridges, deep scratches or vice versa, impart same to surface.

On 10/10/16, Bill Berg <overthehillbill@gmail.com> wrote:

> I have a leaky left stove burner control valve, can't seem to find
> replacement, or cure the leak. Any suggestion's. I figure if nothing else ,
> will have to find a metric plug for the left line.
>

--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>