

| Subject: | Re: Rear windo seal replacement tips |
| From: | Jim Felder |
| Date: | Sun, 16 Oct 2016 12:27:35 +0000 |
Not a problem, unless you mean just the arm and yes, it should come off. Jim On Sat, Oct 15, 2016 at 3:15 PM Eric Caron <ecaron1@comcast.net> wrote: > Hi Jim, > > My neighbor is a retired auto body shop owner and in his late > 70’s. He claims to remember well working on the busses. I don’t think > this window seal is his favorite to do but he remembered the process well. > > And, thanks for the tips on the rear defrost. I was told it was > not working two winters ago. I went out and cleaned the contacts by the > window and then turned it on. My talking thermometer showed the window > temp clime quickly from 50 to 62. I turned it off then feeling confident > it now works. > > Also, I realize now I should get those curtains and rods off before I > bring the van to him. > > Should I remove the rear wiper or is that not a problem? > > Eric > > > > On Oct 15, 2016, at 2:51 PM, Jim Felder <jim.felder@gmail.com> wrote: > > > > I've done it twice. It's the easiest sealed window on the car. If your > friend knows old school rubber seal replacement, you'll have no problems. > You should be able to put 12v directly to the window contacts to see if the > heater is any good, use a cheap digital thermometer to read it. I have > never actually seen a bad one that I remember. I have a couple of good ones > should you need one. > > > > Jim > > > > On Sat, Oct 15, 2016 at 9:34 AM Eric Caron <ecaron1@comcast.net <mailto: > ecaron1@comcast.net>> wrote: > > Hi folks, > > > > I have found a tiny spot of rust starting under my rear window > seal on the outside. this may be the original window seal or was replaced > a long time ago. > > Though my other windows have the channel and trim I’m planning > to use a new seal with no trim. > > > > I have a experienced painter friend who plans to take out the window fix > and match the paint and then return the windo. He has done busses in the > past and has experience on older cars. > > > > So, any tips or suggestions of things I should have done while this > window is out? > > > > Pretty sure the rear defroster doesn’t work. Anything I should know > about the wires or such while we are working on the window? > > > > > > Eric Caron > > 85 GL Auto Westfalia >
Have something to add on this topic today? Revive this thread in the forum »