By Outer TieRod are You referring to the TieRod End ~ We only have

TieRods & TieRod Ends not Inner & Outer TieRods ~ If the TieRod End got 

bent I'd be amazed if the TieRod is Still Straight, Especially in the Threaded

Area ~

        May want to take a GoodLook @ the SteeringRack Bolts for Straightness

But since they have Thick Rubber Bushings they are probably OK ~

                                                        ORR ~ DeanB

On 17 Nov , 2016, at 9:28 PM, T Collins wrote:

> Hello volks,
> 
> I thought earlier this evening I was toast. A jeep in front of me stopped
> suddenly and I beard off to the right while braking hard. I ended up
> resting next to a light pole. Seems I hit a boulder and then the lamp post
> with the passenger side wheel. The rim is irreparably bent. Since I was in
> a sharp  turn right it seems like the wheel sticking out prevented damage
> to the vans body.
> 
> Now to why I need your opinions. After replacing the tire, I found that the
> alignment  is off, the passenger side wheel is pointing right while the
> drivers side is pointing straight.
> Looks like I bent the outer passenger side tie rod. Nothing else seems
> bent. What else should I be inspecting? Is it possible the inner tie rod is
> also bent? It was dark, but it did not seem or feel deformed...
> 
> I appreciate your input. I have an outer tie rod available and plan on
> replacing it. Tips on that?
> 
> Thanks,
> T.