You may find another VW connector, with better condition wires, that
will fit. Or, your FLAPS or VW specific parts shop may stock ~ 8"
wires with the proper terminal already crimped on. Removing the wires
from the connector is a small PITA but can be done with a paper clip
or similar. Push up on wire as you apply the tool that closes the ears
on terminal. This web page shows what I mean:

http://www.4130-products.com/step/wiring/index.htm

I made a tool out of a narrow flat blade screwdriver.

Neil.

On 12/1/16, Dan N <dn92610@gmail.com> wrote:
> hi all,
>
> I have this 1985 van, WBX 1.9 with a very bad AFM wiring harness - and I am
> looking for a used one or a way to make one to replace it.. - it's the one
> that came of the wiring loom..

--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>