You can leave it, all injectors fire simultaneously.

Stuart

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
thewestyman
Sent: Sunday, December 11, 2016 4:32 PM
To: vanagon@GERRY.VANAGON.COM
Subject: One injector wire ...

Hi to all,

So, I was trying to figure out why one of the cylinders is not working.
Took out the plug and checked compression.  150.  Great.
So, then it could be the injector not working or something like that.
Before taking out the injector, I swapped the yellow connectors.
Voila, now the other cylinder did not work.
Aha!  So, there must be something wrong with the plug or something around
there.
Checked the plug, no continuity.  But all the others had continuity.
Hmmm.  Then I cut into the wires to see if I can find continuity there.  No.

Solution; I stole power for that plug from the neighboring injector wires.
Now, all is well.  Sort of.

The only question is; can I just leave it as it is or I have to change the
whole harness?

Zoltan