I just recently took delivery of the Glowshift oil sender adapter along
with their oil temp gauge and oil pressure gauge.
I am excited to be getting them installed soon.
Abel did a nice Samba write up on this mod.
Patrick

On Fri, Jan 13, 2017 at 7:26 PM OlRivrRat <OlRivrRat@comcast.net> wrote:

>         I suggest leaving the OEM senders alone & adding 1 of these ~
>
>
>
> http://www.glowshiftdirect.com/oilfilter-sender-adapter-3-4unf-16.aspx
>
>
>
> http://prosportgauges.com/oil-filter-adaptor-plate.aspx
>
>
>
>                                                         ORR ~ DeanB
>
>
>
> On 13 Jan , 2017, at 4:37 PM, Robert Clemmer wrote:
>
>
>
> > I'm getting ready for a planned refresh/overhaul on my 91 2.1 wbx.  A
> year
>
> > or so ago I read somewhere where someone installed an oil temperature
> sender
>
> > on the rear of the engine where the grey oil pressure sender is currently
>
> > located.   I'm considering moving my oil temp sender from the oil drain
> to
>
> > that location.
>
> >
>
> >
>
> >
>
> > Does anyone know of the sender p/n or the thread size of the adapter
> plug in
>
> > the case that accommodates the pressure sender?  I wrote it down a year
> or
>
> > so ago but cannot find where I put it.
>
> >
>
> >
>
> >
>
> > Thanks, Bob C
>
> --
Sent from Gmail Mobile