What I'm looking for is the temperature sender that will fit where the current oil pressure switch adapter is.  I've already moved the pressure switch from between the pushrod tubes for the pressure sender.  I have a temperature sender in oil drain plug.  I thought it would just be cleaner to move the temp sender from the bottom of the engine to the rear.  Keeps a wire from hanging down.  Out of the weather, etc.  I guess I'll just measure when the engine is out. 

Thanks, BobC

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of C. Abney
Sent: Saturday, January 14, 2017 9:44 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Oil temperature sender

http://www.van-cafe.com/home/van/page_2543_919/oil_pressure_switch_adaptor.html

Http://www.van-cafe.com/home/van/page_357_919/oil-pressure-switch-grey-.75-1.05-bar.-mounts.html

On 1/13/17, Patrick Seurynck <climb12@gmail.com> wrote:
> I just recently took delivery of the Glowshift oil sender adapter 
> along with their oil temp gauge and oil pressure gauge.
> I am excited to be getting them installed soon.
> Abel did a nice Samba write up on this mod.
> Patrick
>
>
> On Fri, Jan 13, 2017 at 7:26 PM OlRivrRat <OlRivrRat@comcast.net> wrote:
>
>>         I suggest leaving the OEM senders alone & adding 1 of these ~
>>
>>
>>
>> http://www.glowshiftdirect.com/oilfilter-sender-adapter-3-4unf-16.asp
>> x
>>
>>
>>
>> http://prosportgauges.com/oil-filter-adaptor-plate.aspx
>>
>>
>>
>>                                                         ORR ~ DeanB
>>
>>
>>
>> On 13 Jan , 2017, at 4:37 PM, Robert Clemmer wrote:
>>
>>
>>
>> > I'm getting ready for a planned refresh/overhaul on my 91 2.1 wbx.  
>> > A
>> year
>>
>> > or so ago I read somewhere where someone installed an oil 
>> > temperature
>> sender
>>
>> > on the rear of the engine where the grey oil pressure sender is 
>> > currently
>>
>> > located.   I'm considering moving my oil temp sender from the oil drain
>> to
>>
>> > that location.
>>
>> >
>>
>> >
>>
>> >
>>
>> > Does anyone know of the sender p/n or the thread size of the 
>> > adapter
>> plug in
>>
>> > the case that accommodates the pressure sender?  I wrote it down a 
>> > year
>> or
>>
>> > so ago but cannot find where I put it.
>>
>> >
>>
>> >
>>
>> >
>>
>> > Thanks, Bob C
>>
>> --
> Sent from Gmail Mobile
>

--
It seems my TO-DO list is a FITO (faster-in-than-out)